AutomotiveCloudWatch

Glossary · Robotics and Physical AI

Safety, Standards and Deployment

148 terms in the Robotics and Physical AI glossary, each with its one-line definition.

148 terms, A to Z

  • 80 W Rule Japanese safety rule that once required fencing for industrial robots with motors above 80 watts, relaxed in 2013 to allow cobots
  • AI Robot Association AIRoA Japanese association building shared datasets and a data platform for training robot foundation models, supported by NEDO
  • ANSI/A3 R15.06 Main US safety standard for industrial robots and robot cells, adopting ISO 10218 and adding a US part for robot users
  • ANSI/A3 R15.08 US standard series for the safety of industrial mobile robots such as AMRs, with parts for makers, integrators and users
  • ANSI/ITSDF B56.5 North American safety standard for driverless and guided industrial vehicles such as AGVs and automated forklifts
  • Association for Advancing Automation A3 North American robotics and automation trade group that writes US robot safety standards and publishes robot order statistics
  • Bill of Materials BOM Complete list of a product's parts and their costs, the main way the industry estimates what a humanoid costs to build
  • Biomechanical Limits Maximum force and pressure a robot may apply to each human body region on contact, set to stay below the onset of pain
  • Brake Test Automatic routine check that pushes each robot joint against its holding brake to confirm the brake can still hold the arm
  • Brownfield Deployment Installing robots into an existing site built for people rather than a new purpose built facility
  • CE Marking EU label showing a product meets European safety, health and environmental rules, required before robots or cells can be sold there
  • Collaborative Application Complete robot setup, including tool, parts and task, designed and verified so people can safely work close to it
  • Collaborative Operation Older standards term for running a robot while a person shares its workspace during production, now called collaborative application
  • Collaborative Workspace Area inside a robot cell where a robot and a person can be present at the same time while the robot works
  • Commissioning Installing, setting up, testing and starting a robot system at the customer site until it runs production
  • Common Cause Failure CCF Single event or shared flaw that disables two redundant safety channels at once, defeating the redundancy
  • Cycle Time Time a robot or cell takes to finish one job and be ready for the next, the basic measure of automation speed
  • Diagnostic Coverage DC Share of dangerous failures in a safety system that its own self checks can detect
  • Domestic Substitution Chinese push to replace imported robot components and machines with Chinese made ones
  • Duty Cycle Share of time a motor or robot works under load versus resting, which governs heat buildup and ratings
  • Emergency Stop: Big red button anyone can hit to bring a machine to an immediate safe stop, overriding all other functions
    Emergency Stop e-stop Big red button anyone can hit to bring a machine to an immediate safe stop, overriding all other functions
  • Enabling Device Three position grip switch on a teach pendant that must be held in the middle for the robot to move during manual operation
  • EU AI Act EU law regulating AI by risk level, treating AI used as a safety component of machinery, including robots, as high risk
  • EU Machinery Regulation EU law setting safety requirements for machinery including robots, replacing the Machinery Directive from January 2027
  • Factory Acceptance Test FAT Test of a robot system at the builder's facility before shipment, where the customer checks it works as promised
  • Fail Safe over EtherCAT FSoE Protocol that carries emergency stop and other safety signals over the same EtherCAT network as normal control data
  • Fenceless Robot Robot setup that works without a physical fence, protecting nearby people with sensors and safety software instead
  • Fully Loaded Labor Cost Full cost of employing a worker, including benefits, taxes, training and turnover, used to judge whether a robot pays off
  • Functional Safety Part of machine safety that relies on control systems responding correctly to faults, engineered to defined reliability targets
  • GB 11291 Chinese national safety standard for industrial robots and robot systems, adopted from ISO 10218
  • GB/T 12643 Chinese national robotics vocabulary standard, aligned with ISO 8373
  • Goods-to-Person GTP Warehouse picking method where machines bring items to a worker at a fixed station instead of the worker walking the aisles
  • Hand Guiding Moving a robot by pushing it by hand through a handle with a safety switch while it runs slowly under safety monitoring
  • High-Speed Manual Mode T2 Manual robot mode allowing a program to run at full speed under an enabling switch, tightly restricted and absent on many robots
  • Human-Robot Collaboration HRC Work where people and robots share a workspace and tasks at the same time, the main use case for cobots
  • Human-Robot Interaction HRI Study and design of how people and robots communicate and work together, including speech, gestures, trust and safety
  • Humanoid Robot Guiding Opinions 2023 MIIT policy setting Chinese national humanoid goals for key components by 2025 and mass production by 2027
  • IEC 60204-1 International standard for the electrical equipment of machines, defining stop categories 0, 1 and 2
  • IEC 61496 International standard for electro sensitive protective equipment such as light curtains, safety scanners and safety cameras
  • IEC 61508 Foundational international functional safety standard for electrical, electronic and programmable safety systems
  • IEC 61800-5-2 International standard defining drive safety functions such as safe torque off and safely limited speed
  • IEC 62061 International standard for safety control systems on machinery, rated by SIL and derived from IEC 61508
  • IEC 62443 International standard family for cybersecurity of industrial automation and control systems, now relevant to robot safety
  • Industrial Robot Special Education Mandatory Japanese safety training for anyone who teaches, inspects or repairs industrial robots within their range of motion
  • Ingress Protection Rating IP rating Two digit code rating how well a device is sealed against dust and water, such as IP67
  • Interlocked Guard: Robot cell door with a safety switch that stops the robot when opened and needs a deliberate reset to restart
    Interlocked Guard Robot cell door with a safety switch that stops the robot when opened and needs a deliberate reset to restart
  • International Federation of Robotics IFR Global robotics industry association known for its yearly World Robotics report on robot installations
  • International Robot Exhibition iREX Major robot trade show held in Tokyo every two years where makers launch new industrial and service robots
  • ISO 10218-1 International safety standard for the design and construction of industrial robots, Part 1 of ISO 10218
  • ISO 10218-2 International safety standard for industrial robot applications and cells, now home of collaborative safety requirements
  • ISO 12100 Basic international machinery safety standard setting the general method for identifying hazards and reducing risk
  • ISO 13482 International safety standard for personal care robots such as mobility aids, exoskeletons and person carriers
  • ISO 13849-1 Widely used standard for designing safety related machine control parts, grading each safety function by performance level
  • ISO 13850 International standard for the design of emergency stop devices and the emergency stop function
  • ISO 13855 International standard for calculating how far a safety sensor must sit from a hazard based on human approach speed
  • ISO 14119 International standard for choosing and fitting interlocking devices on machine guards and preventing their defeat
  • ISO 25785-1 Draft safety standard for industrial robots that must actively balance, such as humanoids and legged robots
  • ISO 3691-4 International safety standard for driverless industrial vehicles including AGVs and autonomous mobile robots
  • ISO 8373 International robotics vocabulary standard defining robot, industrial robot, service robot and related terms
  • ISO/TS 15066 Technical specification that gave the first detailed cobot safety guidance, including body region force and pressure limits
  • Japan Robot Association JARA Japan's robot makers association, which publishes official robot production and order statistics
  • Japan Robot Strategy Japanese national robotics plan launched in 2015 as the New Robot Strategy to make Japan a leading robot innovation hub
  • JIS B 0134 Japanese Industrial Standard for robotics vocabulary, the counterpart of ISO 8373
  • JIS B 8433 Japanese Industrial Standard for industrial robot safety, the counterpart of ISO 10218
  • Light Curtain: Safety device that projects a row of infrared beams across an opening and stops the machine if a beam is broken
    Light Curtain Safety device that projects a row of infrared beams across an opening and stops the machine if a beam is broken
  • Lights-Out Manufacturing Production that runs fully automatically with no people on site, a long standing automation ideal
  • Lockout/Tagout LOTO Procedure in which a worker locks and tags every energy source of a machine before maintenance so it cannot restart
  • Logistics 2024 Problem Japanese truck driver and delivery capacity shortage from overtime caps in April 2024, which spurred logistics automation
  • Made in China 2025 Chinese industrial strategy launched in 2015 to upgrade manufacturing and cut reliance on foreign tech, including robotics
  • MassRobotics Interoperability Standard Open standard letting mobile robots from different makers share position, status and routes so mixed fleets can coexist
  • Mean Time Between Failures MTBF Average operating time a machine runs between breakdowns, a common measure of robot reliability
  • Mean Time Between Interventions MTBI Average time a robot works alone before a person must step in to help, reset or correct it
  • Mean Time to Dangerous Failure MTTFd Average time before a safety component fails in a way that stops it protecting people
  • Mean Time to Repair MTTR Average time to find and fix a fault and get a machine running again
  • Ministry of Economy, Trade and Industry METI Japan's ministry for industry, trade and energy and the lead ministry for robotics policy and subsidies
  • Ministry of Industry and Information Technology MIIT China's ministry for industrial policy and IT and the lead agency for robotics and humanoid policy
  • Moonshot Research and Development Program Japanese government program funding ambitious 2050 research goals, including autonomous AI robots that live alongside people
  • Muting Safety function that briefly bypasses a light curtain or scanner while material passes, using extra sensors to tell it apart from people
  • National Institute of Advanced Industrial Science and Technology AIST Japan's largest public industrial research institute, known for HRP humanoids and robot safety work
  • New Energy and Industrial Technology Development Organization NEDO Japanese national agency under METI that funds and manages large robotics and industrial technology R&D programs
  • Operational Stock Estimated number of industrial robots in service in a country or worldwide, the basis for robot density
  • Opportunity Charging Topping up a mobile robot's battery in short bursts during idle moments rather than one long charge
  • Overall Equipment Effectiveness OEE Factory score combining availability, speed and quality to show how productively a machine is used
  • Payback Period Time it takes for savings from a robot to add up to its purchase and installation cost
  • Performance Level PL Grade from a to e rating how reliably a machine safety function works, with e the most reliable
  • Perimeter Guarding Physical fences and locked gates that keep people out of a robot cell while it runs automatically
  • Picks per Hour Number of items a robot or person picks in an hour, the standard speed measure for warehouse picking
  • Pilot Deployment Limited trial of robots at a customer site to test safety and payoff before a larger rollout
  • Power and Force Limiting PFL Safety approach keeping force and pressure low enough on contact with a person to avoid pain or injury
  • Predictive Maintenance Using sensor data to spot wear and fix parts just before they fail
  • Preventive Maintenance PM Maintenance on a fixed schedule regardless of condition, such as regreasing gears or replacing batteries
  • PROFIsafe Safety protocol that carries emergency stop and other safety signals over PROFINET or PROFIBUS networks
  • Proof of Concept PoC Early test showing a robot can technically do a task at all, before any pilot of its economics
  • Protective Separation Distance Minimum gap a robot must keep from a person under speed monitoring so it is already stopping if the person comes closer
  • Protective Stop Automatic stop triggered by safety devices such as light curtains or scanners, usually easier to reset than an emergency stop
  • Quasi-Static Contact Contact in which part of a person is pinched or clamped by the robot and cannot pull away, allowing much lower forces
  • Reduced Speed Mode T1 Manual mode limiting tool speed to a safe walking pace so an operator can teach and test a robot up close
  • Reducer Life Expected lifetime of a robot's joint gearboxes, the main wearing part that sets maintenance and replacement costs
  • Residual Risk Risk left after all reasonable safety measures have been applied, which must be communicated to users
  • Restricted Space Part of a robot's reach it is actually allowed to enter once limiting devices or safety rated software limits are applied
  • Return on Investment ROI Money an automation project earns or saves relative to its cost, the main test for scaling a robot pilot
  • Risk Assessment Structured process for finding machine hazards, judging their likelihood and severity and deciding how to reduce them
  • Robot Body Manufacturer Chinese industry term for the company that designs and assembles the complete robot, between component suppliers and integrators
  • Robot Cell Complete robot work area built for one job, including robot, tool, fixtures, conveyors, guarding and controls
  • Robot Class 2025 ISO 10218-1 category sorting robots into Class I or Class II by mass, force and speed hazard
  • Robot Density Number of industrial robots per 10,000 manufacturing workers, the standard comparison of national automation
  • Robot Friendly Environment Japanese policy idea of adapting buildings, processes and equipment so robots can work in them easily
  • Robot Plus Application Action Plan Chinese 2023 MIIT plan to spread robots across manufacturing and services such as logistics, healthcare and elder care
  • Robot Utilization Share of available time a robot spends doing useful work rather than idle, waiting or under repair
  • Robots as a Service RaaS Business model where customers rent robots by subscription or pay per hour or task instead of buying them
  • Runtime How long a battery powered robot can work on one charge, which decides whether it covers a full shift
  • Safe Brake Control SBC Drive safety function that reliably controls and checks a motor's holding brake
  • Safe Operating Stop SOS Drive safety function that holds a motor still under power and triggers a full stop if it moves
  • Safe Stop 1 SS1 Drive safety function that slows a motor under control and then safely removes torque
  • Safe Stop 2 SS2 Drive safety function that slows a motor under control and then holds it still with power on under monitoring
  • Safe Torque Off STO Drive safety function that cuts power that would make a motor produce force without disconnecting the drive
  • Safeguarded Space Area around a robot protected by fences or sensors so people are kept out or the robot stops while it works
  • Safely Limited Speed SLS Safety function that stops a robot or motor safely if its speed exceeds a set limit
  • Safety Bumper Soft pressure sensitive edge on a mobile robot that stops it the moment it touches something
  • Safety Category One of five ISO 13849-1 architectures, B and 1 to 4, describing how a safety circuit behaves when a part fails
  • Safety Controller Safety certified computer that independently monitors a robot's positions, speeds and safety inputs and stops it if limits break
  • Safety Function Machine function whose job is keeping people safe and whose failure would immediately raise the risk
  • Safety Integrity Level SIL Rating from SIL 1 to SIL 4 for how reliably a safety system performs, with SIL 4 the highest
  • Safety Mat Pressure sensitive floor mat that stops a machine or blocks restart when someone stands on it
  • Safety PLC Programmable logic controller certified for safety tasks, using redundant processors to command safe stops
  • Safety Relay Self checking relay module that monitors emergency stops, door switches and light curtains and safely cuts power
  • Safety-Rated Monitored Stop SMS Collaborative method where a robot holds still under monitoring while a person is in the shared area, now called monitored standstill
  • Safety-Rated Soft Axis Limiting Certified controller software that limits where a robot can move, how its tool points and how fast it goes in set zones
  • Service Level Agreement SLA Contract commitment on service performance such as robot availability, fault response time and spare part delivery
  • Single Point of Control Principle that while a person controls a robot by hand, no other device or computer can start or move it
  • Site Acceptance Test SAT Test after installation at the customer plant confirming a robot system meets agreed performance in real production
  • Specialized and Sophisticated SMEs Chinese government designation for niche leading small firms, with a top little giant tier that gets subsidies
  • Speed and Separation Monitoring SSM Safety method where sensors track people's distance and the robot slows as they approach and stops before contact
  • Stop Category IEC 60204-1 classification of machine stops 0, 1 and 2 by whether power is cut immediately or after controlled braking
  • Stopping Distance How far a robot keeps moving after a stop command until it comes fully to rest
  • System Integrator SI Company that designs, builds, programs and installs complete robot systems combining robots, tools, vision and safety
  • Takt Time Pace a factory must finish each unit to meet demand, equal to available time divided by units needed
  • Throughput How many units, picks or tasks a robot or system finishes in a given time
  • Total Cost of Ownership TCO Full lifetime cost of a robot including purchase, integration, safety, maintenance, energy and downtime
  • Transient Contact Brief bump between a robot and a person free to move away, allowing higher forces than clamping
  • UL 1740 North American safety standard for robots and robotic equipment, used by test labs to certify robots for US and Canadian sale
  • Unit Economics Cost and revenue tied to one robot or unit of robot work, such as cost per hour or per pick, versus human labor
  • Uptime Share of scheduled time a robot is available and working rather than broken down or under repair
  • Virtual Commissioning Testing a robot cell's control programs against a simulation before anything is built or installed
  • Warehouse Execution System WES Software coordinating automated warehouse equipment and people in real time, between order management and machines
  • Warehouse Management System WMS Software tracking warehouse inventory, locations, orders and labor that tells people and robots what to do
  • World Humanoid Robot Games Multi sport humanoid robot competition first held in Beijing in August 2025 to showcase China's humanoid industry
  • World Robot Conference WRC Large annual robotics conference and exhibition in Beijing where Chinese makers show robots, humanoids and components

Full entry for members

Every term has a full entry for members: the plain-words definition, the practitioner note and the typed links between terms.

See membership

ACW Robotics and Physical AI Glossary, edition 2026.11.1. The headword and one line are open to everyone.